This is a thicker glitter vinyl with a knit woven backing. Smooth on top with a clear vinyl layer, followed by sealed in glitter, then a colored vinyl layer, and finally the knitted backing.
These glitters don’t always match the background color that it has been put on. Emerald Green Glitter has green glitter
This has some stretch to it.
Thickness: 1.0 mm
Color of Backing: White knit woven
Glitter can be used for making purses, wallets, bows, bows, keyfobs, appliques, ITH bags, backpacks, and more!
Special Notes When Working with Glitter:
· 1. Not a marine grade vinyl
· 2. Not recommended in turning bags less than 5 inches
· 3. Using a hair dryer, placing in the dryer (low heat) or setting vinyl out in the sun will help soften it for easier turning.
· 4. When working with this glitter, if it is sticky, please put a small amount of powder on it and wipe it off. This will make it easier to work with on your machine.
· 5. When doing embroidery with our glitter, to keep it from sticking to the machine, please tape a piece of stabilizer on your machine. This will help the glitter to slide across your machine when placing the back of the vinyl at the end of your project.
Because of the thickness probably not a good domestic friendly vinyl
Please note the on-screen color representations are not necessarily precise representations of actual colors due to differences in color monitors.
Colors, textures, and pliability of vinyl can change from batch to batch. If you are needing colors to be the same, please order extra for your project. (We cannot guarantee color matching vinyls from one batch order to another).
All of our vinyl is hand cut; machine washable and dryable (on low heat). Drying on low heat will help your vinyl to last longer.
There may also be a slight odor to this product.
